1.5 Inch Smart Gas Meter Pulse Output Internet Capable Remote Read Natural #G10

1.5 Inch Smart Gas Meter Pulse Output Internet Capable Remote Read Natural #G10. 1.5 Pulse Output Gas Meter. Our remote readable 1.5 Inch Gas Meters offer an affordable solution for accurately metering gas in a variety of use cases. It is an ideal solution for most residential, light commercial, and light industrial gas systems.

This meter generates 1 pulse per cubic foot of gas that passes through it. Read and count these pulses from up to 200 feet away with one of our pulse counting electric meters. And from there you can read the pulse counting electric meter from anywhere in the world with our free Software and remote meter reading system. This pulse output gas meter can be connected to our Omnimeter Pulse v.

This is our most advanced pulse counting electric kWh meter. This pulse counting meter can count the pulse outputs from up to 3 Pulse Output Devices. The pulse counting Omnimeter Pulse v.

4 can then be connected to a computer either locally or over the internet. Our EKM Push3 system provides a cloud based solution for monitoring your gas meters via the Omnimeter Pulse v. Our free software options include reporting and billing tools. This listing includes the gas meter, the 1.5 threaded brass fittings and seals.

It does not include the pulse counter meter or the other items pictured. Measures in cubic feet to 9999999.98 cubic feet at up to 7.25 PSI. Dimensions: H327mm x W316mm x D226mm. Weight: 17.2 lbs, or: 7.8kg. Pulse Rate: 1 pulse per cubic foot of gas measured.

Connection Thread: Brass 1.5 Inch NPT (National Pipe Thread). Inlet and outlet separation (to center): 200 mm. Direction of inlet: Left in, right out. Nominal flow-rate (Qn): 353.1 ft³/h.

Minimum flow-rate (Qmin): 3.53 ft³/hr. Maximum flow-rate (Qmax): 565 ft³/hr. Natural Gas: 581,950 BTU/hr.

Propane: 1,405,720 BTU/hr at 60ºF (temperature dependent). Minimum Operating Pressure: 0.0735 psi. Maximum Operating Pressure: 7.25 psi. Total pressure loss: = 0.04 psi. Permissible Error: Qmin = Q. Recording Reading: 0.002 ft³. Recording Reading: 9999999.98 ft³. Readout is in cubic feet, with resolution to tenths. Operating ambient temperature: -13131 °F.

Can measure: Artificial coal gas, natural gas, liquefied petroleum gas, air, propane, inert gases or any other inert non-corrosive gas. Meter design according Standards: - EN 1359:1998/A1:2006 - 2014/32/EU(MID) - OIML R137:2012.

Index cover: Printed index cover of polycarbonate. Surface Paint: blue polyester powder coat. Pulse Wires: White is ground. Red is a tamper signal wire that is always closed unless a magnet is used to taper with the pulse output. Blue and Green are both pulse output wires that are normally closed but open once per cubic foot of gas that the meter reads.

We also carry 3/4 Pulse Output Gas Meters for smaller systems. Our water meters, gas meters and electric meters all have a pulse output.

The connection to the pulse counting electric meter is a simple two wire terminal block connection. Rugged steel and brass construction. Compact, easy-to-install design, water-proof for outdoor mounting.

Pulse output wires can be removed or ignored if they aren't going to be used. These meters are perfect for knowing exactly how much gas is being used by a house, an appliance, a furnace, a trailer, or anything else that uses natural gas or propane. And the remote readable capabilities make these meters immensely valuable for any landlord or property manager that is off site. The analog display and meter itself are built to be tamper-proof.

No external power source required to operate. We stand behind all of our products and try to offer only affordable and quality metering products and services. VISIT EKM METERING'S WEBSITE FOR MORE INFORMATION. Please Note - Some of the photos in this listing are for illustration purposes, and do not represent something included with the listed item. This listing is for the Pulse Output Gas Meter and Brass Fittings Only. Return within 30 days if you are not completely satisfied. Cool meter, good price and he got it here in a hurry. "Great value as described snap to install". "Easy to use just perfect thanks". Great way to meter electricity for business use of home! Stands by his product and services. Was sent so fast it made my head spin. Perfect meter for billing rental customer. "Meter arrived fast and safe, thanks". _gsrx_vers_1469 GS 9.1 (1469). This item is in the category "Business & Industrial\Fuel & Energy\Power & Utilities\Gas & Water Meters". The seller is "kwhmeters*com" and is located in this country: US. This item can be shipped worldwide.

Brand: EKM Metering Inc
MPN: G10 Gas 1.5 Inch Heat Furnance
Manufacturer: EKM Metering
Category: Electric, Electrical Energy Monitoring, Measuring
Electrical Equipment Type: Electrical kWh Energy Power Meters
UPC: 600291383518