Do not scratch the chrome rod. Before removing old lift supports, examine any fittings supplied to determine which components must be re-used. When the program requires you to be under the vehicle or under the support, please use the safety support. It would be better for two people to assist in the replacement, so that the cover can be raised or lowered as needed to avoid being squeezed when replaced by a single person.Before removing the old lifting bracket, check the end connections and compare them with the devices on the vehicle to ensure that they are the same as the extension length. Place a small flat head screwdriver under the U-belt at the end of the bracket and remove the old bracket from the vehicle. Turn the screwdriver, lift the screwdriver about 1 / 8 on the retaining strip, then pull the support out of the vehicle and loosen the screwdriver. To install a new bracket, follow the reverse steps. Do not clamp the new support end on the ball socket without lifting the U-belt, otherwise it may cause damage. The lifting bracket needs to be fully extended for installation. In most cases, they cannot be compressed unless they are on the vehicle. If the ends are not aligned, turn the bracket. Connect the axle end of the bracket to the vehicle, and then turn the entire bracket device clockwise to align the ends. Do not force the mounting bracket. The note there will NOT be read. The images shown are not the actual item and are for your reference only. 1.30 days return offered for BRAND NEW items only, it starts from the day you received it. We will try our best to resolve any kind of issue.
FEEDBACK IS VERY IMPORTANT TO US. Mass Air Flow Sensor MAF.Coilovers Shocks Suspension Springs Kits For DODGE CHARGER SRT8 2006-10 RWD ONLY. Air Bags 2500LB For Firestone 255C 1/2"NPT 3/8"-16UNC Pair Air Suspension. For 2005-18 Nissan Frontier RWD 4.0L Complete Struts Coil Spring Shocks Assembly.