Gas tank has a left side petcock opening. It features flush lower mounts and includes pop up cap.
This Wyatt Gatling tank has a 4 inch stretch to the back of the tank which does not affect the mounts. The underside of the tank will accept 1/8 inch National Pipe Thread hose barb fittings for the fuel crossover line. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank.It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean condition and seal to help stop leaks and prevent corrosion Check petcock opening making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of the petcock. Front hole center to center measures 3-1/4 inch rear hole center to center is 3 inch and front to back center to center is 9-1/4 inch. Use this list below to confirm fitment for your bike as it is most accurate fitment for this product. FITS THE FOLLOWING BIKE APPLICATIONS 0- Harley-Davidson Custom. Weight: 17 pounds (lbs) Front Width: 11.5 inches Overall Length: 23-1/2 inches Tunnel Length: 22.5 inches Rear Tunnel Height: 2 inches Front Tunnel Height: 4 inches Rear Height: 2.5 inches Rear Width: 3-1/8 inches Bottom Length: 21.5 inches Top Length: 22.5 inches Front Height: 9 inches. Please do not leave feedback without contacting us first.
We back the products we sell.